|
|
| שורה 1: |
שורה 1: |
| − | Learning how to build your own PERSONAL COMPUTER from scratch is usually a very difficult task find out nothing about personal computers. However once you learn how to do it as well as understand exactly how to proceed, it actually gets quite enjoyable having the ability to easily strip down and increase old or brand new PC's. I would prefer to take this possiblity to lay out the essential components of some type of computer and help you figure out how to build a computer from scratch.
| + | {{ספאם}} |
| − | | |
| − | PC Components
| |
| − | | |
| − | The most common pc components that you will have to have are the mouse, keyboard, hard drive, floppy drive, ram chips, sound and artwork card, power supply, motherboard and check. I'm assuming that you know what each of these components look just like. If you are generally unsure about some components just hunt for pictures of them online and you will spot what they are usually.
| |
| − | | |
| − | Connection Process
| |
| − | | |
| − | Firstly you have to do business with the mother board and the mother board installation plate. Firstly, gently screw the particular motherboard onto mom board plate using the notches or screws which has been provided with the package or package. Once this is done you need to insert the PC (Central Control Unit) into its slot on the motherboard. Sometimes these PROCESSOR sockets have levers which you need to gently release for you to open it up so take note of that. Gently slide the CPU into its socket making sure the pins on the backside slide within correctly otherwise it could possibly get damaged. You can right now clip the lever into place and be sure it is risk-free.
| |
| − | | |
| − | Now you should attach the heatsink towards the CPU chip. You might discover that the CPU already includes the heatsink/fan mounted on it then you can read additional. Now you should connect small cable from the heatsink fan for the corresponding socket for the motherboard to supply it power.
| |
| − | | |
| − | The next step is always to place the ram chips to their respective slots which are long and thin. Once this continues to be done you may mount the motherboard growing plate onto the inside of the laptop or computer and screw/slip it in so that it is attached appropriately.
| |
| − | | |
| − | The power supply may be the next component to handle. The power supply area is often located behind the pc case and it is indicated with screw holes which are unoccupied. Just try and maneuver it around to adjust to with the corresponding holes when you screw it within. The power supply features a main system connection which gets attached to the power slot for the motherboard, a floppy power connector which gets plugged into the floppy drive as well as a few standard peripheral strength connectors (red-colored, yellow and black wires) which get connected to your hard drives and cd roms. You will have to mount the hard disks, cd roms along with floppy drives and connect them along with those connectors ensuring the red cable on each electrical power connector is pointed inwards towards the motherboard. I'll explain precisely why below.
| |
| − | | |
| − | Right, now we move onto both the ports on the actual motherboard called the key and secondary IDE Plug-ins. You will notice them while they are rectangular using brackets around them. these ports are employed to connect the computer drives and cd roms. The cables that get attached to these two slots are 40 flag IDE cables using have 3 contacts on each cable television. Make sure the longest part of the cable is attached to the IDE slots. You need to get in touch the primary IDE cable from the motherboard to the particular hard drive(s) plus the secondary IDE port can be used to connect your own DVD Roms for a motherboard. When you plug these IDE cables in to the cdroms and hard drives ensure that the red line strip is side-by-side with the reddish wire strip of the power connectors that are connected to people devices. Consult your manual should you have one to find out how to use the different jumpers to switch between master and also salve drives about each port. This will permit you to choose which pushes are primary and also secondary.
| |
| − | | |
| − | Now that the power supply is linked to the motherboard and the various other components you need to plug graphics and also sound card to their slots. Once this is done make sure you connect the entrance panel connectors on the corresponding LED lights which means that your lights will show up when the laptop or computer boots. Failure to do so will result in non function in the system.
| |
| − | | |
| − | Lastly make sure everything is related properly. This includes the particular external mouse, keyboard, monitor cable as well as power cables so the computer will start and function properly. If all is done well then it should be okay.[http://www.myspace.com/video/rid/111283960 build computer]
| |
גרסה אחרונה מ־00:37, 9 באוגוסט 2012
זהירות! דף זה חשוד בפעולות ספאם ולכן מועמד למחיקה. אם אתה חושד שפעולה זו שגויה, נא לעבור להיסטוריה של הדף ולשחזר אותו במידת הצורך.
עדכון אחרון לדף על־ידי תומר בתאריך 09/08/2012.
ישנם כעת 1,734 דפים מדווחים.
