|
|
| שורה 1: |
שורה 1: |
| − | Learning developing your own PC from scratch could be a very difficult task if you know nothing about pcs. However once you figure out how to do it along with understand exactly how to handle it, it actually turns into quite enjoyable to be able to easily strip down and increase old or new PC's. I would like to take this possiblity to lay out principle components of a computer and help you discover ways to build a pc from scratch.
| + | {{ספאם}} |
| − | | |
| − | PC Components
| |
| − | | |
| − | The most widespread pc components that you will have to have are your mouse, keyboard, hard drive, floppy drive, ram chips, sound and artwork card, power supply, motherboard and check. I'm assuming that you'll know what these components look like. If you are usually unsure about a few components just search for pictures of them on the internet and you will dsicover what they are.
| |
| − | | |
| − | Connection Process
| |
| − | | |
| − | Firstly you have to utilize the mother board plus the mother board mounting plate. Firstly, gently screw the motherboard onto mom board plate with all the notches or screws which have been provided with your package or system. Once this is done you simply must insert the COMPUTER (Central Digesting Unit) straight into its slot around the motherboard. Sometimes these COMPUTER sockets have levers which you need to gently release to be able to open it up so become aware of that. Gently slide the CPU into its socket ensuring the pins for the backside slide throughout correctly otherwise it could possibly get damaged. You can currently clip the lever back into place and make sure it is secure.
| |
| − | | |
| − | Now you should attach the heatsink to the CPU chip. You might realize that the CPU already is sold with the heatsink/fan that come with it in which case you can read even more. Now you should connect the tiny cable from the actual heatsink fan on the corresponding socket around the motherboard to offer it power.
| |
| − | | |
| − | The next step should be to place the ram chips into their respective slots which are long and slender. Once this have been done you may possibly mount the motherboard increasing plate onto along side it of the pc and screw/slip it in so that it is attached effectively.
| |
| − | | |
| − | The power supply could be the next component to cope with. The power supply area is usually located at the back of the pc case and is indicated with screw holes which can be unoccupied. Just try along with maneuver it around to fit with the corresponding holes when you screw it within. The power supply includes a main system connector which gets connected to the power slot for the motherboard, a floppy power connector which gets plugged into the floppy drive in addition to a few standard peripheral power connectors (crimson, yellow and dark wires) which get plugged into your hard devices and cd roms. You will need to mount the hard drives, cd roms and floppy drives along with connect them with those connectors being sure that the red wire on each strength connector is pointed inwards on the motherboard. I'll explain precisely why below.
| |
| − | | |
| − | Right, now we move onto both ports on the particular motherboard called the key and secondary IDE Plug-ins. You will notice them when they are rectangular using brackets around these. these ports are used to connect the hard disk drives and cd roms. The cables that get attached to these two locations are 40 pin IDE cables along with have 3 connections on each cable tv. Make sure the longest perhaps the cable is linked to the IDE slots. You need for connecting the primary IDE cable in the motherboard to the actual hard drive(s) plus the secondary IDE port can be used to connect the DVD Roms for a motherboard. When you select these IDE cables into the cdroms and hard drives ensure that the red cable strip is side-by-side with the red wire strip from the power connectors that happen to be connected to people devices. Consult your manual should you have one to see how to use the different jumpers to modify between master along with salve drives upon each port. This will permit you to choose which hard disks are primary and also secondary.
| |
| − | | |
| − | Now that the power supply is attached to the motherboard and also the various other components you will have to plug graphics along with sound card into their slots. Once this is done be sure to connect the entrance panel connectors towards the corresponding LED lights so that your lights will appear when the computer boots. Failure to do so will result in non function with the system.
| |
| − | | |
| − | Lastly make certain everything is connected properly. This includes the particular external mouse, keyboard, monitor cable along with power cables so your computer will switch on and function appropriately. If all is performed well then it ought to be okay.[http://groups.diigo.com/group/gfpdmbvpbrgqhcvxmoju/content/tips-on-how-to-remove-the-security-shield-virus-out-of-your-system-5176132 click]
| |
גרסה אחרונה מ־10:25, 8 באוגוסט 2012
זהירות! דף זה חשוד בפעולות ספאם ולכן מועמד למחיקה. אם אתה חושד שפעולה זו שגויה, נא לעבור להיסטוריה של הדף ולשחזר אותו במידת הצורך.
עדכון אחרון לדף על־ידי תומר בתאריך 08/08/2012.
ישנם כעת 1,734 דפים מדווחים.
